Our Materials
Among
the materials available are:
- BUBBLE WRAP
Wide range of sizes including 1/2", 5/16", 3/16", and 1/8" bubble offer protection from shock and vibration. Amine free greaseless antistat also available. - CONDUCTIVE FOAM
Used in shipment of integrated circuits to protect against electrostatic discharge available in Firm or Soft formulation in sheets 1/8" to 1/2" thick. - CORRUGATED BOXES
Custom foam lined cartons and dunnage on diecut pads from Highland Containers. - DOW ETHAFOAM 120 (NOVA)
1.2 pounds per cubic ft. closed cell Polyethylene foam available in planks. - DOW ETHAFOAM 170 (SELECT)
1.7 pounds per cubic ft. closed cell Polyethylene foam available in planks. - DOW ETHAFOAM 220
2.2 pounds per cubic ft. closed cell Polyethylene foam available in planks, sheets and rods with anti-static or fire retardant plank. - DOW ETHAFOAM 400
4.0 pounds per cubic ft. closed cell Polyethylene foam available in 2" x 24" x 108" planks. - DOW ETHAFOAM 600
6.0 pounds per cubic ft. closed cell Polyethylene foam available in 2" x 24" x 108" planks. - DOW ETHAFOAM 900
9.0 pounds per cubic ft. closed cell Polyethylene foam available in 2" x 24" x 108" planks. - DOW TRYMER
Rigid Polyurethane foam for insulation in the range -65 F to +250F. Also used as a fibrous glass support material. 1.6, 1.8, 2.0, 4.0 and 6.0 pcf density. - ENSOLITE
3.5 to 9.0 pounds per cubic ft. closed cell foam.Temperature range - 20 to 250 F. Applications in industrial gasketing, flotation insulation and athletic padding. - ETHAFOAM 221
A low cost, low density Polyethylene foam sheet available in roll form in thicknesses from 1/32" to 1/2". Used in packaging as a wrap material or as an interleaving material. - EXPANDABLE POLYSTYRENE FOAM (EPS)
A molded Polystyrene foam used in packaging applications and also insulation applications usually available in densities of 1, 1.5, and 2 pounds per cubic ft. - EXPANDED POLYPROPYLENE
Resilient molded foam for packaging, automotive and other applications. Chemically stable, high thermal resistance, and available in a variety of densities. - FILTER FOAM
An open pore Polyurethane foam available in pore sizes from 10 ppi (pores per inch) to 90 ppi, used as air filters in air conditioners and I.C. engines. - FLEXIBLE FOAM POLYESTER URETHANE
2.0 - 6.0 pounds per cubic ft. Polyurethane foam, used in display packaging and gasketing applications, available in colors. - FLEXIBLE FOAM POLYETHER URETHANE
A low density (usually 1.2 to 1.5 pounds per cubic ft.) flexible urethane foam used in industrial packaging applications where higher loads are involved. - LOOSE FILL
Reusable, clean, and lightweight packaging material available in either recycled or biodegradeable formulas. - MINICEL
Chemically crosslinked Polyethylene foam available in 3" bun form with an extremely fine cell structure. Minicel can be easily skived to thinner thicknesses. Higher density grades are also available. - PRESSURE SENSITIVE ADHESIVE (PSA)
An adhesive system which can be applied to the foam to adhere the foam part to another substrate by removing the paper backing. - RIGID URETHANE HIGH DENSITY
6.0 to 20.0 pounds per cubic ft. Urethane used for architectural models and speciality high strength areas. - STYROFOAM BB
1.8 pounds per cubic ft. extruded Polystyrene foam bouyancy billets for marine floating structures. - STYROFOAM DB
1.8 pounds per cubic ft. extruded Polystyrene foam for use in floral, novelty, and display applications. - STYROFOAM HI-100
3.0 pounds per cuc ft. extruded Polystyrene foam used as insulation where high load bearing is required. - STYROFOAM PANEL CORE
1.8 pounds per cubic ft. extruded Polystyrene foam for insulation in mobile homes, modular housing, cold storage, industrial lagging, perimeter insulation, plaster and drywall insulation base, and cavity wall insulation. - STYROFOAM SE & TG
1.8 pounds per cubic ft. extruded Polystyrene foam smooth skin boards for use as insulation material and in residential construction as sheathing material. Also used as core material in panels. - TRI-TECH POLYPRO
Polypropylene resilient planks available in 1.3, 1.9 and higher density, and Tri-Tech's exclusive 1.0 PCF density formulation. - VOLARA
Fine-celled, irradiation crosslinked polyolefin foams. Available as continuous planks or rolls in a wide range of densities, thicknesses and colors. Versatile physical properties make Volara suitable for many design applications. - VOLEXTRA
A versatile group of composite materials that combine all the unique characteristics of Volara with the added advantage of extruded coatings and embossing. With Volextra there is an enhanced capability to meet new surface and structural requirements with a light weight foam material. - VOLTEK CROSSLINKED POLYETHYLENE FOAM
A crosslinked Polyethylene foam used in sporting goods and orthopedic appliances where durable padding is required. Available in 2, 4, and 6 pounds per cubic ft. densities. - WOODEN PALLETS
Cushioning layered into wood pallets or foam applied to wood sheets and custom cases.
ENSOLITE IS A REGISTERED TRADEMARK OF RUBATEX
ETHAFOAM, STYROFOAM, AND TRYMER ARE REGISTERED TRADEMARKS OF DOW CHEMICAL
POLYPRO IS A REGISTERED TRADEMARK OF TRI-TECH, INC.
VOLARA, VOLEXTRA & MINICEL ARE REGISTERED TRADEMARKS OF VOLTEK
